Claim ownership to earn the Verified Owner badge on your reviews and to reply to other pilots' feedback.
Cirrus Design Corp SR20 · 2018 · El Paso, TX
N603JA is a 2018 Cirrus Design Corp SR20 (serial 2464), registered to Texas Wings In The Air II LLC (LLC) in El Paso, TX. Its FAA registration is recorded as v and expires August 2033; the airworthiness certificate dates from November 2018 (7 years ago). It carries a Lycoming IO-390-C3B6 engine rated at 215 hp, the engine on 48% of registered Cirrus Design Corp SR20s. Its Mode-S transponder broadcasts the ICAO 24-bit address A7D32D. It is one of 1,643 Cirrus Design Corp SR20 aircraft on the FAA registry. Texas Wings In The Air II LLC holds 4 aircraft on the registry.
Source: FAA aircraft registry (public record). Community reviews and photos below.
745 of the 1,545 registered Cirrus Design Corp SR20 carry this engine (48%), across 17 engine variants on the type.
Source: FAA engine reference (ENGINE.txt), matched on this registration's engine code.
A Cirrus Design Corp SR20 needs roughly 2,850 ft of runway for takeoff at sea level (takeoff distance ~2,443 ft plus a 15% safety margin). Check it against a destination airport →
Planning estimate for takeoff only — excludes landing distance, wind, density altitude, and contamination. Verify against the aircraft's POH/AFM.
Reported by pilots, owners and enthusiasts — community-reported and admin-checked before they publish. Always verify anything important against the aircraft's records.
Be the first to share what you know about N603JA.
Help other pilots, buyers and curious aviators. Reviews appear after a quick admin check.
Own N603JA? Claim ownership to earn the Verified Owner badge on your reviews and to reply to other pilots' feedback.
Commonly available reference sources for the Cirrus Design Corp SR20. Always confirm against the manufacturer's current, authoritative publication for your specific aircraft.
These are commonly available reference sources. FerryFlight Hub does not provide sample or generated documents on this page.
FerryFlight Hub is independent and not affiliated with, endorsed by, or sponsored by any aircraft manufacturer, the FAA, or any document publisher. References are NOT for operational, navigational, or flight-planning use — always rely on the current, FAA-approved documentation for the specific aircraft. We link to official or publicly available sources and do not host or redistribute copyrighted material. Provided "as is," without warranty of any kind as to accuracy, completeness, or currency.
Report a problem with this document (wrong fitment, outdated, or copyright / takedown) · Full document policy
Calculate density altitude, takeoff roll, and climb performance for a Cirrus Design Corp SR20 at any airport.
Airport Performance CalculatorPre-filled with SR20 performance data
FerryFlight connects you with experienced ferry pilots for domestic and international delivery flights.
Get a Quote